Retsch PT 200 - Manual (Page 24)

Operating the machine
24
Fig. 14: Connecting the PT200 to the DR100
For the connection between the DR100 and the PT200, use the interface cable,
which is included in the retrofit kit’s scope of supply.
• Insert the connection cable (VK) into the interface (DF) on the back of the
DR100.
Fig. 2: DR100 – Insert the connection cable.
Insert the connection cable (VK) into the interface (PF) on the back of the
PT200.
Fig. 3: PT200– Insert the connection cable
Pos : 6.31 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Gerät und Z uteilgerät gleic hzeitig s tarten @ 3\mod_1302780258781_9.doc @ 25097 @ 2 @ 1
5.13 Starting device and vibratory device simultaneously
Pos : 6.32 /00010 Bedi enungsanleitung en Kapitels ammlungen/PT100 (2011)/0015 PT 100 Bedienung/1550 PT100 / PT 200 Modul Gerät und Z uteilgerät starten @ 3\mod_1302779710476_9.doc @ 25018 @ @ 1
• Put sample vessels onto all sample outlets on the device.
DF
VK
VK
PF