RKI Instruments GD-K11D - Manual (Page 10)

6 • Description Model GD-K11D Operator’s Manual
Status lights
The display board includes five status lights. Table 3 lists each light and its function.
Program buttons
The display board includes five buttons. The MODE, ∆ (PEAK), ∇ , and SET (AL.P)
buttons are directly below the display screen. The TEST button is the red button near the
bottom right of the display board. Table 4 lists each button and its function.
Table 3: Model GD-K11D Status Lights
Light Status
PW/TR
(power) • live power is connected to GD-K11D and the
power switch is ON (solid light)
• fail condition (flashing light)
AL
(alarm)
• gas alarm condition (solid light)
• over range condition (solid light)
ZERO • GD-K11D is prepared for adjustment of zero
setting (flashing light)
• GD-K11D accepted zero setting (solid light)
SPAN • GD-K11D is prepared for adjustment of span
setting (flashing light)
• GD-K11D accepted span setting (solid light)
SKIP GD-11D is in maintenance mode (flashing light)
Table 4: Model GD-K11D Program Buttons
Button Function
MODE Enters maintenance mode
∆ (PEAK) • Increases/changes the setting on the display
• Displays the peak reading
∇ Decreases/changes the setting on the display
SET (AL.P) • Prepares a setting to be changed
• Enters a new setting
• Displays the alarm point
TEST Enters alarm test mode