RKI Instruments GD-K11D - Manual (Page 16)

12 • Start Up Model GD-K11D Operator’s Manual
6. Press the MODE button.
The ZERO light turns off, and 3. appears on the display screen.
NOTE: The purpose of this procedure is to set the zero reading only. It is not necessary to
set the span (response) reading at this time.
7. Press the MODE button for approximately 3 seconds to exit maintenance mode and
return to the normal screen.
8. Rotate the housing cover up to its original position, then tighten the thumbscrew at
the top of the housing to secure the cover to the housing.