RKI Instruments GX-2003 - Manual (Page 28)

28 • Downloading Data from the GX-2003
infrared port on the side of the GX-2003 with the infrared
port on the cable.
3. Press and hold the
POWER/ENTER button on
the GX-2003 until you hear
a beep, then release it. The
GX-2003 will begin it’s
power up sequence with the
pump turning on. If a
successful connection
between the GX-2003 and
the computer occurs, the
Connect light in the Download window turns green after a
few seconds and “Connection Successful.” displays in the
Download area of the Download window. The GX-2003’s
pump will turn off. The Windows
®
icon tray will indicate that a
wireless connection is in effect.
4. If you selected Automatic Download, the downloading
process begins automatically after a successful connection
is made.
5. If you are going to download data manually, you can
download all information at once, or you can download only
the information you want by using the Download Commands.
USB Connector
Serial Connector
To Computer
Serial Port
To Computer
USB Port
IrDA/USB or
IrDA/Serial Cable
Infrared Port
Cable’s Infrared Port
GX-2003
Figure 15: Aligning the GX-2003 with the Cable Infrared Receiver
Figure 16: Connection
Message