Robustel R3000 User Guide - Manual (Page 17)

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 16 / 131
Confidential
2.4 Reset Button
2.5 Ethernet ports
Each Ethernet port has two LED indicators (please check the following picture). The
yellow one is Speed indicator and the green one is Link indicator. There are three
status of each indicator. Please refer to the form below.
Indicator Status Description
Speed Indicator
Off 10 Mbps mode.
On 100 Mbps mode.
Link Indicator
Off Connection is down.
On Connection is up.
Blink Data is being transmitted
Function Operation
Reboot Push the button for 5 seconds under working status.
Restore to factory
default setting
Push the button for 60 seconds once you power on the
router until all the three LEDs at the left side (RUN,
PPP, USR) blink at the same time for 5 times.
Reset Button