Robustel R3000 User Guide - Manual (Page 61)

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 60 / 131
Confidential
3.18 Configuration -> NAT/DMZ
This section allows users to set the NAT/DMZ parameters.
Port Forwarding @ NAT/DMZ
Item Description
Defaul
t
Port Forwarding
Manually defining a rule in the router to send all data received on some range
of ports on the internet side to a port and IP address on the LAN side.
Null
Remote IP Set the remote IP address. Null
Arrives At Port The port of the internet side which you want to forward to LAN side. Null
Is Forwarded to IP
Address
The device’s IP on the LAN side which you want to forward the data to. Null
Is Forwarded to Port The device’s port on the LAN side which you want to forward the data to. Null
Protocol Select from “TCP”, “UDP” or “TCP&UDP” which depends on the application. TCP