Robustel R3000 User Guide - Manual (Page 93)

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 92 / 131
Confidential
Retries and still do not receive correct respond packets from PPPoE client, it will send
“LCP Terminal Request” packet to disconnect the connection between PPPoE
server and PPPoE client. “Max Retries” ranges from 3 to 5 times.
3.31 Configuration -> AT over IP
This section allows users to set the AT over IP parameters.
AT over IP
Item Description Default
Enable AT Settings Tick to enable AT over IP to control cellular module via AT command remotely. Disable
Protocol Select from “TCP server” or “UDP” UDP
Local IP
You can enter the IP address of cellular WAN, Ethernet WAN or Ethernet LAN.
Null stands for all these three IP addresses.
0.0.0.0
Local Port Enter the local TCP or UDP listening port. 8091
3.32 Configuration -> Phone Book
This section allows users to set the Phone Book parameters.
Phone Book
Item Description Default