Robustel R3000 User Guide - Manual (Page 98)

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 97 / 131
Confidential
and “EMERG” which from low to high. The lower level will output more syslog in
detail.
Keep Days Specify the syslog keep days for router to clear the old syslog. 14
Log to Remote System
Enable to allow router sending syslog to the remote syslog server. You need to
enter the IP and Port of the syslog server.
Disable
3.37 Configuration -> Event
This section allows users to set the Event parameters.
Event
Item Description Default
Enable Event
Click to enable Event feature.
This feature is used to report R3000’s main running event to SNMP-TRAP or
RobustLink. There are numbers of Event code you can select, such as
“BOOT-UP”, “3G-UP”, “3G-DOWN”, etc. For example if you click “3G-UP” and
select “RobustLink” as the server, when R3000 dial up to connect to 3G network,
it will send event code “3G-UP” as well as relevant information to RobustLink.
Disable