Robustel R3000 User Guide - Manual (Page 97)

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 96 / 131
Confidential
3.35 Configuration -> RobustLink
This section allows users to configure parameters about RobustLink, which is an industrial-grade centralized
management and administration system for the R3000. It allows you to monitor, configure and manage large
numbers of remote devices on a private network over the web.
RobustLink
Item Description Default
Enable RobustLink Click to enable RobustLink feature. Disable
Server address Enter IP address of RobustLink. Null
Port Enter port number of RobustLink. 1883
Password
Enter the password preset in RobustLink.
Note: The passwords set in R3000 and RobustLink need to be the same.
Null
3.36 Configuration -> Syslog
This section allows users to set the syslog parameters.
Syslog
Item Description Default
Save Position
Select the save position from “None”, “Flash” and “SD”. “None” means syslog is
only saved in RAM, and will be cleared after reboot.
NONE
Log Level Select form “DEBUG”, “INFO”, “NOTICE”, “WARNING”, “ERR”, “CRIT”, “ALERT” DEBUG