SPYPOINT TINY-W2 - Manual (Page 7)

12 13
English
English
TEST LIGHT
SD card slot
(bottom view)
12 volt connection
Batteries
compartment
ON/OFF
AA batteries
The receiver requires the use of 6 AA batteries (1.5V). The
use of alkaline or lithium batteries is strongly recommended.
Insert the batteries as indicated. Exact polarity must be
followed. We also recommend the use of new batteries to
ensure maximum performance of the receiver.
External (12V)
The receiver can be powered from an external 12 volt DC
input such as a 12 volt battery (KIT-12V/BATT-12V, sold
separately) or a 12 volt adapter (AD-12V, sold separately).
When using a 12 volt connection, we recommend you to
remove the alkaline batteries to prevent surcharges. To find
the accessories available for the 12 volts, refer to the section
“OPTIONS”.
Solar panel
The receiver can be powered with a 12 volt battery combined
with a solar panel SP-12V (sold separately, refer to the
section “OPTIONS”) to
maintain the charge of the 12 volt
battery (sold separately, refer to the section “OPTIONS”).
MEMORY CARD
Using a memory card (sold separately, refer to the section
“OPTIONS”) is required to operate both the camera
SPYPOINT TINY-W
2 and the Blackbox receiver. When the
camera is turned on, the screen displays “ Insert memory
card ” in “Photo”, “Video” or “Test” mode if no memory
card is used, the camera also beeps. The camera supports a
32GB memory capacity, the receiver supports 8GB.
Before
inserting or removing the memory card, the camera or
the receiver must be turned off.
Failing to do so may cause
loss of pictures or damage the pictures already recorded on
the memory card. When the SD card is full in the camera,
the viewing screen indicates “
Disk full ” when “Photo”,
“Video” or “Test” mode are selected. When the SD card is
full in the receiver, the transmission and recording of images
continues by clearing the first photos on the memory card.
The following data shows an approximate quantity of photos
or video length that can be taken by the camera depending on
the memory card capacity.
RESOLUTION 2.0 GB 4.0 GB 8.0 GB 32 GB
4 MP
6 MP
8 MP
10 MP
12 MP
1900
1580
1190
950
790
3800
3160
2380
1900
1580
7600
6320
4760
3800
3160
30400
25280
19040
15200
12640
VIDEO RESOLUTION
320 x 240
640 x 480
45 min
30 min
1h30
1h
3h
2h
12h
8h
“BUSY” LED
The “BUSY” light, located beside the LCD screen, lights up
when the camera records a file.