SPYPOINT TINY-W2s - Manual (Page 12)

22 23
English
English
Resolution:
(High/Medium/
Low)
Set the photo resolution.
High: 8 MP
Normal: 5 MP
Low: 3 MP
Temperature:
(°C/°F)
Select the temperature display in °F or °C.
Continuous:
(Yes/No)
Allow the user to take pictures or videos
even if the memory card is full. The camera
will continue to record photos or videos by
deleting the first files recorded.
Power:
(Batteries/
Electricity)
Allow the user to select the battery power or
the electricity power.
Choose "ELECTRICITY" if the camera
is powered of a main electric supply.
(using a 12-volt DC adapter AD-12V,
sold separately). Main electric supply is
recommended for security purposes. It
provides an instant trigger time when a
movement is detected. The lithium battery
pack and the AA batteries can remain safely
inside the camera and it is ideal in case of
a blackout. A 12-volt DC adapter that can
provide a minimum of 800 mA is required
(See "OPTIONS" for accessories).
Note: When using the electricity power, the
"MULTI-SHOT" mode and the "DELAY"
between photos are disabled as the camera
starts instantly every time it detects motion.
Also, the imprinting temperature on each
picture is disabled.
Infrared:
(On/One LED/Off)
Allow the user to choose how many LEDs
will be turned on.
On: Every LEDs work when taking photos
or videos at night.
One LED: Only a single LED works (see
figure). This option can be useful when using
an IR-Booster/Black LEDs IR-Booster (sold
separately, see "OPTIONS").
Off: LEDs are deactivated so your night
photos or videos are pitch black.
TINY-W 2
LED for
infrared
sensor