Regency Excalibur EX90 Large Wood Fireplace (US Edition) - Manual (Page 30)

FPI FP90 Wood Fireplace 30
INST
ALLA
TION
eXcaliBur accent Kit installation
08/23/05 918-438
WOOD FIREPLACE
EX90
ACCENT KIT INSTALLATION
3) Remove the 2 studs on the sides of the Hood. Insert
the new studs through the holes and secure them by
fi rst putting on the washer and then tighten the nut.
1) Remove the handles by removing the nut and screw.
Install the new handles by placing them in position over
the holes on the surround louver. Put the screws through
the holes and secure them by tightening the nut.
4) Re-install faceplate with plated screws.
2) Place the emblem over the emblem design on the sur-
round. Insert the studs through the holes. To secure
them fi rst put on the split lock washer and then the nut
and tighten.
installation