Barco R9002031 - Manual (Page 34)

Installation adjustment mode
8-7 5975607 BARCODATA 808s 120397
Loosen bolts E, F, G and H to pivot the blue CRT until the center of the
Blue image and the center of the Green image coincide. When the
angle of the blue CRT is corrected, tighten the four bolts.
Press the <ENTER> key to continue with the diagonal focusing menu.
Press the <EXIT> key to return to the CRT projection angle adjustment.
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
Blue crosshair
Green crosshair
Move the blue CRT to the
outside, away from the green
CRT
Blue crosshair
Green crosshair
Move the blue CRT towards
the green CRT
Projection angle correctly aligned for screen width SW1. The same projection angle is misaligned for new screen width SW2.
Realignment is necessary. Each screen width change requires
readjustment of the projection angle.
SW2
(SW1 > SW2)
370b