Additional network users – UVP Life Science User Manual
Page 26
LS Software User Guide
12
•
The IP Address is listed and should be noted, as it will be used with every "client" computer’s
License Manager setup. After noting the IP Address, close the Command Dialog.
NOTE: In some cases users will notice a list of multiple IP addresses. If the shipped system
includes an OptiChemi 600 camera, for example, users will see more than one IP address. To
ensure that the correct IP address is recorded, check with the IT Administrator before proceeding.
The IT Administrator must verify that the selected IP address corresponds to the network adapter
with access to the domain.
Additional Network Users
Repeat the following steps for each client computer.
•
Open VisionWorksLS on the client computer. A Welcome to the Licensing Wizard window will
appear. Select the
Server based licensing option, and select Next.
NOTE: VisionWorksLS will not authenticate across network segments so the IT Administrator
must
•
Ensure that all client PC’s are on the same subnet/segment before installing VisionWorks on
each PC.