Waldmann PULSE HFMD version VFC III - with MFT - Manual (Page 10)

10
GB Operating Manual Light control “PULSE HFMD - Vers. III“ GB Operating Manual Light control “PULSE HFMD - Vers. III“
Activate setting level 1
Press both keys
for at least 2 seconds
Actuation Display
Logo fl ashes white
Sensor LED II fl ashes white
Change basic settings - Change setting level
Do not actuate any key for at
least 10 seconds
Activate setting level 2
Press both keys
for at least 7 seconds
Logo is off
Sensor LEDs fl ash green
Activate setting level 3
Press both keys
for at least 12 seconds
Logo fl ashes white
Sensor LEDs fl ash blue
Leave parameterization mode
Logo fl ashes constantly
Fig. 8
Sensor LEDs
The parameterization mode must be left fi rst in order to activate
another setting level.
Fig. 3
Key I
Logo
Light
bar
Key II
LED I
LED II