Explanation of the functions (part 4) function 11, Function 10 – Waldmann PULSE HFMD version VFC III - with MFT User Manual
Page 19
19
GB
Operating Manual Light control “PULSE HFMD - Vers. III“
GB
Operating Manual Light control “PULSE HFMD - Vers. III“
Explanation of the functions (part 4)
Function 11
Demo mode
Function to demonstrate and to
test the light functions.
The default setting of this function
is “OFF“, i.e., the demo mode is
inactive.
All control times are working in the
seconds range if the demo mode
is switched on.
Note: This mode is left automati-
cally 10 minutes after the last key
was pressed.
The function can be changed on
lights with sensors XXX /P
Function 10
Sensor LED
Function to switch both LEDs in the
sensor operating panel on and off.
The default setting of the function
is “OFF”, i.e., the LEDs in the light
head are switched off.
For lights without the column
operating panel, the function is
switched to “ON“.
If the function is switched on, the
LEDs in the light head light in addi-
tion to the light bar display.
The function can be changed on
lights with sensors XXX /P
Fig. 3
Key I
Logo
Light
bar
Key II
LED I
LED II
Fig. 8
Sensor LEDs