Weidmuller Portacal 1000 - Instrument Calibrator - Manual (Page 11)


CAL
Run
Calibration
Jumper
• Calibration
Equipment Requirements
You will need:
• An accurate,  + 1/ digit multimeter
• A suitable  V DC power supply
• An accurate current/voltage reference
• Suitable Phillips head screwdriver (for opening the case)
Keyboard operation
During calibration the keys function as follows:
•
Ó
accepts that the output is at the required level. Note: always
allow about 10 s for the output to stabilise before accepting a value.