Western Digital WD ShareSpace User Manual - Manual (Page 114)

NETWORK STORAGE MANAGER: ADVANCED MODE - 109
WD SHARESPACE
USER MANUAL
System Tab
The System tab in Advanced Mode enables you to set the system date and time, set
up alerts, change the admin password, perform software or firmware upgrades,
create a backup copy of the system files, restore the system to factory defaults,
generate and set up an SSL certificate, or perform system reboot or shutdown.
The System tab provides access to the following configuration options:
• General Setup
• Alerts Setup
• Admin Password
• Update
• Restore Configuration
• Advanced
• UPS
• Shutdown/Reboot
General Setup
The General Setup button on the System tab home page allows you to perform
basic configuration of device. You can provide a name and brief description for the
device, select a compatible web access protocol, and set the time zone. You can set
the date and time manually or enable automatic time synchronization by NTP
(Network Time Protocol) Service. You can also manually specify the IP address of the
NTP servers to which you want to synchronize.