Western Digital WD ShareSpace User Manual - Manual (Page 150)

NETWORK STORAGE MANAGER: ADVANCED MODE - 145
WD SHARESPACE
USER MANUAL
WD ShareSpace to USB Backup
Use the WD ShareSpace to USB Backup tab to set a source share for this
backup method.
To set a source share name for WD ShareSpace to USB drive backup:
1. On the USB Shares page, click the WD ShareSpace to USB Backup tab.
2. Select a share to be used as source share from the Source Share list.
3. Click Submit.
Note: If no source is selected, backup from the WD ShareSpace is disabled.
Quota
The Quota button on the Storage tab home page allows administrators to enable or
disable quota control for the device and set grace time and quota limits for each user.
Quota is used to limit the maximum storage capacity for each user. The accumulated
files or folders stored in a volume for the specified user cannot exceed the quota
setting. Once the user data exceeds the quota, a 7-day (by default) grace period
commences. The user still can store up to 100 MB of additional data on the volume
within the grace period. When the grace period expires, the user cannot store
additional data on the volume until deleting the amount of data required to reduce the
total capacity used to below quota setting.