Remote access – Western Digital WD ShareSpace User Manual User Manual
Page 135
NETWORK STORAGE MANAGER: ADVANCED MODE - 130
WD SHARESPACE
USER MANUAL
Remote Access
WD ShareSpace comes with MioNet enabled by default. The Remote Access
button on the Network tab home page allows you to control the MioNet service on
the storage device. If MioNet is not already installed on the client computer, follow
the instructions under “MioNet Remote Access” on page 55.
MioNet Icons
•
Start/Stop MioNet - Shows Stop MioNet if MioNet is running; shows Start
MioNet if MioNet is stopped.
•
Restart MioNet - Stops MioNet if it is running and starts it again.
•
Reset MioNet - Resets all MioNet account information on the ShareSpace. If the
ShareSpace is registered to a MioNet account, that registration is erased so that
the unit is now unregistered. This status displays in the upper right corner of the
page. Any shares created by MioNet or MioNet users remain, and no data is lost.
Access to these shares over the LAN requires the use of the MioNet username
and password.
MioNet Service Status Messages
•
MioNet service connection status
•
Started - MioNet service is started
•
Stopped - MioNet service is stopped and will start on system restart.
•
Disabled - MioNet service is disabled and will not start on system restart.