Making a direct connection, Making a direct connection using a web browser – Western Digital My Passport Wireless User Manual User Manual
Page 26
CONNECTING THE DRIVE
21
MY PASSPORT WIRELESS
USER MANUAL
Making a Direct Connection
Making a Direct Connection Using a Web Browser
After setup, when you want to connect to your computer (if not already connected), follow
these steps:
1. Make sure the My Passport Wireless device is on, the Power and Battery Status LED is
lit, and the Wi-Fi LED is solid blue.
2. On your computer, open the list of available networks.
3. Select MyPassport.
4. Open a browser and type one of the following:
Windows computer: http://mypassport (or assigned name)
Mac computer: http://mypassport (or assigned name).local
Windows or Mac computer: http://192.168.60.1 (drive’s default IP address)
5. Press Enter to display the My Passport Wireless dashboard.
You can now move content between the drive and the computer. (See “Using a Wi-Fi
Connection to Load Content” on page 31.)
Windows 7
Windows 8