Western Digital My Passport Wireless User Manual - Manual (Page 34)

CONNECTING THE DRIVE
29
MY PASSPORT WIRELESS
USER MANUAL
4. Click Save.
Removing a Connection
1. To remove a connection, click Remove Remembered Network on the Wi-Fi page.
The Remembered Connections screen displays:
2. Click the minus sign (-) next to the connection you want to remove, and then click
Close. You can set up a new connection when you want to use it again. if you remove
all connections, a No connections found message displays.
MAC Address Unique identifier of the My Passport Wireless drive's
network interface.
IP Address IP address of your My Passport Wireless drive.
DHCP Service Service that assigns IP addresses to devices on the My
Passport Wireless network. On by default. If you turn the
service Off, you must assign static addresses to clients on
the network.