Western Digital My Passport Wireless User Manual - Manual (Page 55)

UPDATING FIRMWARE
50
MY PASSPORT WIRELESS
USER MANUAL
Performing a Manual Update
1. Go to http://support.wdc.com/product/download.asp to locate and download an available
file to your computer, or c lick the Online location of the WD My Passport Wireless
firmware link at the bottom of the screen.
2. Download the latest firmware file.
3. Connect to the drive’s Wi-Fi network (direct connection).
4. In the Manual Update section, click Update from File.
5. Navigate to the firmware update file and click Open.
6. Review the confirmation message and click Install and Reboot. The update takes
about five minutes to install on your drive. It is critical to leave the device on until the
installation is complete.
When the update is complete, your drive reboots. Reconnect the wireless link from your
computer directly to the drive.