Western Digital My Net N900 Central User Manual - Manual (Page 32)

BASIC SETTINGS AND TASKS
28
MY NET N900 CENTRAL
USER MANUAL
3. Select the device you want to set up and click Next to display the Step 3. Share
function for storage screen.
4. If you select internal hard drive storage, the following screen displays:
Note: If the storage device is locked, enter the device’s password as prompted.
5. In the table, select the check box(es) for the desired services. The services allow you to
serve the contents stored on the internal hard drive or a connected USB device using
Share (SMB), DLNA, iTunes, and FTP.
6. Enter a Workgroup Name to enable devices in the same workgroup to share
resources.
7. Create or change your user account by entering a user name and password for
accessing content on the internal hard drive or a connected USB device (e.g., SAMBA
share or FTP access). The default value is Public Share.
8. Click Next to save your settings.
9. On the Step 4 screen, do one of the following:
Click Back to select another storage device from the list. Repeat steps 3-8 for each
device.
Click Finish. The My Dashboard home screen appears.