Western Digital My Net N900 Central User Manual - Manual (Page 33)

BASIC SETTINGS AND TASKS
29
MY NET N900 CENTRAL
USER MANUAL
Adding a Wi-Fi Device
To connect a WPS-enabled wireless device, press the WPS button on the front of the router
or enter a PIN on the device’s Wi-Fi connection page. If the device is not capable of WPS,
you can still connect to the router using a network name and password.
1. Click the Add a Wi-Fi Device icon.
2. Select one of the two listed options and follow the appropriate procedure below.
Connecting a WPS-Enabled Device
1. Click the Click here to connect using WPS link to display the screen shown below:
2. Select one of the three WPS methods:
a. Method 1: Push Button : Press the WPS button on the front of the router or click the
virtual button on this screen. On your wireless device, press the physical WPS
button or click the virtual WPS button.
b. Method 2: Device PIN: Enter the wireless device’s WPS PIN code.
c. Method 3: Router PIN: If prompted by your wireless device, enter the WPS PIN
shown on the screen into your wireless device.