Western Digital My Net N900 Central User Manual - Manual (Page 84)

INSTALLING AND USING WD PRINT SHARE
80
MY NET N900 CENTRAL
USER MANUAL
Using the Connect Button With a Scanner
1. Select the scanner from the list on the WD Print Share Control Center.
2. Click Connect. The status changes to Connected.
3. Launch the software that came with your scanner.
4. After the scanning job is done, disconnect by clicking Disconnect or let the scanner
disconnect automatically in the predefined time set in Tool > Set Timeout in the menu.
Using the Scan Button
You can also use the Scan button on the WD Print Share Control Center to activate
scanning with the industry standard TWAIN or WIA interface.
1. Select the scanner from the list on the WD Print Share Control Center.
2. Click Scan. You are prompted to select a scanner interface. A scanner user interface
appears on the screen.
3. Choose options and click Scan to scan your picture or document.
4. After scanning is done, click Close.