Advanced lan category – Western Digital My Net N900 Central User Manual User Manual
Page 48
ADVANCED SETTINGS
44
MY NET N900 CENTRAL
USER MANUAL
Advanced LAN Category
Wi-Fi Protected Setup (WPS) Screen
Purpose: Add a new wireless device into this network using the WPS push button or PIN;
generate a new PIN or set it to the default value.
Device PIN Code
Enter the wireless device’s WPS PIN code and click
Start.
Enable Router’s WPS PIN
Personal identification number for WPS authentication.
Enable WPS
Enable the router to establish a secure connection to
other WPS-enabled Wi-Fi devices. Enabled by default.
Push Button Method
Click the blue WPS button on the screen to activate
the connection process.
Router PIN Code
Enter the PIN shown on the screen into the wireless
device’s screen. The default PIN is printed on the
bottom of the router.
Optionally, click the appropriate button to generate a
new PIN or reset it to the default value.
Guest Access Screen
Purpose: Allow visitors access to the 2.4 GHz and 5 GHz wireless bands. For information on
setting up guest access, see “Enabling Guest Access” on page 58.