Western Digital My Net N900 Central User Manual - Manual (Page 60)

ADVANCED SETTINGS
56
MY NET N900 CENTRAL
USER MANUAL
Automatic Internet Time
Synchronization Automatically synchronizes your router's clock with an Internet
time server.
Daylight Saving Dates If you select Daylight Saving time, from the drop down lists, select
the month, week, day of the week, and time of the start and end of
Daylight Saving time in your time zone.
Daylight Saving Offset If you select Daylight Saving time, from the drop-down list, select
the daylight saving offset. The offset is a formula that combines a
time of day with the time zone and is based on a 24-hour clock.
Enable Daylight Saving Click to enable or disable Daylight Saving time.
NTP Server Used From the drop-down list, select the name of the NTP server to be
used.
Time Current date and time at the router’s location.
Time Zone Select the time zone in which the router is located.
Firmware Update Screen
Purpose: Check for router firmware updates and upload new firmware.
For information on performing updates, see “Updating the Router’s Firmware” on page 69.
System Screen
Purpose: Save configuration settings on your local hard drive, load configuration settings, restore
factory default settings, and log out.
For information on factory resets and rebooting, see “Restoring the Router to Factory Defaults” on
page 70 and “Rebooting the Router” on page 70.
Logout Click Logout.
Restore Settings from a File To restore settings from a file, click Choose File and select it. Click
Restore Configuration.
Save settings to a file Click Save Configuration. The router’s current configuration is
downloaded to your computer.
Connection Check Screen
Purpose: Use ping tests to check connectivity between the router and network/Internet
hosts.
Connection Check Result The result of whether your router can reach the specified host
name or IP address.
Host Name or IP Address Enter the host name or IP address of a computer you want to
locate on the network. Click Ping.