Wintec FileMate Identity Tablet - Manual (Page 16)

Before Getting Started
15
2
When the IDENTITY tab battery is charged, disconnect the power adapter or the USB
cable from IDENTITY tab.
 When the battery is charged using the 5-pin power adapter, disconnect the
adapter from IDENTITY tab or disconnect the power cable.
 You can also charge the IDENTITY tab battery using the USB cable that came
with IDENTITY tab when you purchased it. Connect the USB cable to your
IDENTITY tab USB port and to the USB port on your PC or laptop computer.
However, the IDENTITY tab battery may not be charged when the USB cable is
connected to the USB port on certain devices, such as the audio sets of some
automobiles and TV set-top boxes.
 The IDENTITY tab battery may be charged slowly when using the USB cable.
(The battery may drain when enjoy multimedia, such as watching a video, due
to the slowly charging speed.)

you use your IDENTITY tab again after not using it for an extended length of
time.
 If you charge the fully discharged IDENTITY tab battery, the IDENTITY tab
power will not turn on immediately.
 IDENTITY tab has an internal 4100mAh rechargeable Li-polymer battery. Do
not disassemble your IDENTITY tab and touch the battery.
 The IDENTITY tab battery is a consumable part, so its lifespan decreases
Charging the Battery