Yamato Scientific HC200 Cool Block - Manual (Page 26)

24
Setting and releasing the Alarm
Indication after Step/Step Procedure Explanation
1. Select “Alarm” selection mode
Select the corresponding function. See “ Menu
Functions ” on page 20.
•
Select “Alarm” selection mode by pressing the MODE
key.
⇒ ⇒ ⇒ ⇒ The sub display shows the present status of the
alarm: when the alarm is in inactivity, it shows
and when the alarm is in activity, it shows
.
2. Push the ENTER key
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ The controller turns to the alarm ON/OFF mode.
⇒ ⇒ ⇒ ⇒ The sub display shows
3. Push either the ▼ key or the ▲ key.
•
Set the main display at ON for setting and OFF for
releasing. Push the ▼ key or the ▲ key to flash ON
or OFF on the display.
4. Push the ENTER key
Screen just before pushing the MODE MODE MODE MODE key.
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ The display returns to the screen shown just before
you have pushed the MODE key.
Setting Releasing
Releasing Setting
Setting Releasing