Yamato Scientific HC200 Cool Block - Manual (Page 8)

6
Choose a correct power distribution board or receptacle.
•
Choose a correct power distribution board or receptacle that meets HC200’s rated electric capacity.
Electric capacity : 100 VAC, 3A
•
Do not connect HC200 to an outlet that differs from the above specifications because a fire or electrical
shock will occur.
Install on a level area.
•
Do not installation HC200 on a
non level surface. This will
cause hazards to the operator
and create problems during
actual operation.
Choose a proper place for installation.
•
Do not install HC200 in a place where:
♦ Flammable gas or corrosive gas is generated.
♦ Ambient temperature exceeds 35 ° C.
♦ Ambient temperature fluctuates violently.
♦ There is direct sunlight.
♦ There is excessive humidity and dust.
♦ There is constant vibrations.
•
Keep the following clearance around HC200.
30cm
or more
15cm or more
the front
30cm
or more