Yamato Scientific HC200 Cool Block User Manual
Page 6
4
Control Panel
FIXED-TEMP
PROGRAM
HEAT
STAND BY
MEASURED TEMP
MENU
MODE
ENTER
①
Main Display:
Normally shows the
aluminum block’s
temperature.
②
Sub Display:
Shows the preset temperature, remaining time and
ongoing program number
③
Heater (HEAT) lamp:
Lights up when electric power is supplied to the heater.
④
Standby (STANDBY) Lamp
Lights up when HC200 is ready for the program
operation.
⑤
Function menu (MODE) key:
Use this key when you select a desired function.
⑥
Up/Down key:
Use these keys when you change the parameters.
⑦
Blind Window:
Blank in normal operation. “TROUBLE” lamp lights
up when HC200 has a problem, and “REMOTE” lamp
lights up when the optional communication system is in
use.
⑧
Operation Mode Indicator:
Indicates if HC200 is on the fixed temperature operation
or the program operation.
⑨
Operation Menu (MENU) key:
Use this key when you change operation mode.
⑩
ENTER key:
Use this key when you accept a modified parameter.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩