3D Robotics Aero-M - Manual (Page 4)

3
1
Connect the charger to the power adapter cable
and a wall outlet. Connect the red cable to the +
port and the black cable to the - port.
+
–
2
Set the charger to LiPo and 3A.
LiPo 3A
3
Connect the white connector to the 4S port, and
join the two yellow connectors together.
4S
4
Secure the battery inside the guard bag,
and charge until the status indicator
displays green.
Charging
Complete
The Aero is powered by a rechargeable lithium polymer (LiPo) battery.
Charge the battery before your first flight.
!
Flying with a low battery is a safety risk and can render the
battery permanently unusable. Always fly with a fully charged
battery.
Charge the battery using a designated LiPo balance charger
only. Always monitor the battery while charging. Protect the
battery from extreme heat, extreme cold, puncturing, and
flammable surfaces. Always transport, charge, and store the
battery in the guard bag.
Inspect the battery for damage before and after flying. If you
observe any swelling of the package or the battery ceases
to function, do not use the battery; locate your local battery
recycling center, and dispose of the battery. In the US and
Canada, visit call2recycle.org to find a location. Do not
dispose of the battery in the trash.
Flight Battery
Charging Safety
Charger with power cable and
split-wire charging cable
Charger settings
Flight battery charging wiring Charging in process