Step 2: remove the cover(s) from the drive, Frame 1 - 6 size drives with phase i control, Ac b d e – Rockwell Automation 20D Stegmann Feedback Option Board for PowerFlex 700S Drives User Manual
Page 4
4
Stegmann Feedback Option Board for PowerFlex® 700S Drives
Step 2: Remove the
Cover(s) from the Drive
The steps for removing the covers of the drive are different depending on
the size of the drive. Refer to the appropriate instructions:
•
Refer to
Frame 1 - 6 Size Drives with Phase I Control
below.
•
Refer to
Frame 1 - 6 Size Drives with Phase II Control on page 5
•
Refer to
•
Refer to
Frame 10 - 14 Size Drives on page 5
Frame 1 - 6 Size Drives with Phase I Control
Continue with Step 3:
Remove the Control Assembly from the Drive on
Task
Description
Loosen the captive screw.
Push down on the front cover.
Pull the front cover away from the assembly.
Pull the side cover forward.
Lift the side cover off of the control assembly.
A
B
C
D
E
Esc
7
8
9
4
5
6
1
2
3
.
0
+/-
Sel
Jog
Alt
Exp
Param #
S.M.A.R.T.
Exit
Lang
Auto / Man
Remove
DRIVE
DRIVE
SYNCHLINK
ENABLE
A
C
B
D
E
=