Rockwell Automation 20P PowerFlex DC Drive - Frame A Field Circuit Board User Manual
Page 14
Advertising
![background image](/manuals/576910/14/background.png)
14
PowerFlex® DC Drive - Frame A Field Circuit Board
2. If necessary, remove the power wiring from terminals U, V, W, C, D,
and PE.
3. Remove the plug-in field terminal block on the bottom of the drive.
4. Remove the two screws that secure the bottom air flow plate to the
power terminal isolation strip.
Remove plug-in
field terminal block
Note: Drive with fan shown.
Remove two screws
Note: Drive with fan shown.
Advertising