Rockwell Automation 20P PowerFlex DC Drive - Frame A Field Circuit Board - Manual (Page 19)

PowerFlex® DC Drive - Frame A Field Circuit Board 19
Step 9: Replace the
Protective Covers and
Documenting the Change 1. Replace the protective covers in the reverse order of removal as
described in Step 2: Remove the Protective Covers on page 3 .
2. Install the DPI cable (if present).
3. Record the installation of the new Field circuit board and date of
installation on the Field Installed Option label on the side of the drive
(as shown below).
Related Documentation Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature .
For . . . Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives User Manual - PowerFlex Digital DC Drives 20P-UM001…