Rockwell Automation 20P PowerFlex DC Drive - Frame A Field Circuit Board - Manual (Page 17)

PowerFlex® DC Drive - Frame A Field Circuit Board 17
Figure 1 Field Circuit Board Layout
7. Remove the wires that connect the Field fuses (UF, UF1, VF, VF1) to
the Field circuit board and the cable from connector X3 on the Field
board. (Refer to
Figure 1 above for connector location.)
X 3
1
XFCD
1
X2
UF1
VF1
VF UF
Field fuse connections
UF and UF1 Field fuse connections
VF and VF1
Remove wires
from board end Field fuses Remove wire from
X3 connector