Rockwell Automation 20P PowerFlex DC Drive - Frame D Field SCR Module - Manual (Page 4)

Publication 20P-IN055A-EN-P
4
4. Disconnect the HIM communication cable from the connector on the upper
right corner of the Control board and remove the bottom cover.
Step 3: Remove the Field
Board 1. Loosen the eight hexalobular screws that secure the protective plastic cover
to the control pan and remove the cover.
Pull tabs out
to disconnect
cable.
P F C - X X
Loosen
screws Loosen
screws
Loosen
screw
Loosen
screw
Field board and
SCR module