Rockwell Automation 20P PowerFlex DC Drive - Frame D Field SCR Module - Manual (Page 5)

5
Publication 20P-IN055A-EN-P
Important: Mark all connections and wires before removal to avoid
incorrect wiring during reassembly.
2. Disconnect the cables from connector XFCD and X3 on the field board (see
Figure 2 below for location).
3. Remove the eleven hexalobular screws that secure the field board to the
control EMI shield and remove the board.
Figure 2 Field Circuit Board Layout
XFCD
X3
1
TA_1
P F C - X X
R1 R4
C4 C7
Note: Field board for 70A field supply shown.
T25
Tightening torque:
2.5…4.0 N•m
(22…35 lb•in)
Tightening torque:
1.0…1.2 N•m
(9…10.5 lb•in)
T25