Rockwell Automation 20P PowerFlex DC Drive - Frame B Pulse Transformer Circuit Board User Manual
Page 7
Advertising
Rockwell Automation Publication 20P-IN009D-EN-P - February 2012
7
PowerFlex DC Drive Frame B Pulse Transformer Circuit Board
6. Carefully disconnect the cables from connectors XA, XR and XFCD on
the Control board.
7. Loosen the two captive screws at the top of the Control EMI shield and
lower the shield.
IMPORTANT
If the drive is not in a vertical position, the Control EMI shield must be secured
in order to remain open.
Disconnect
cables
Loosen screws
Control EMI shield
Advertising