Rockwell Automation 20P PowerFlex DC Drive - Frame C AC Line Snubber Board and High Wattage Resistors - Manual (Page 11)

PowerFlex® DC Drive - Frame C AC Line Snubber Board and High Wattage Resistors 11
7. Remove the four screws that secure the wire leads (connections 2V1,
2U1 and 2C1 and one unmarked) from the Field Snubber board and set
the wires aside.
8. Remove the four screws (two on either side of the drive frame) that
secure the support plate for the Pulse Transformer and Field Snubber
boards to the drive frame and remove the support plate and boards.
Remove screws,
washers and
wires
Remove screws,
washers and
wires
Front of Drive
Remove screws
(both sides of
drive frame)