Related documentation – Rockwell Automation 20P PowerFlex DC Drive - Frame C AC Line Snubber Board and High Wattage Resistors User Manual
Page 15
PowerFlex® DC Drive - Frame C AC Line Snubber Board and High Wattage Resistors
15
Step 9: Replace the
Protective Covers and
Documenting the Change
1. Replace the protective covers in the reverse order of removal as
described in Step 2:
Remove the Protective Covers on page 4
2. Install DPI cable (if present).
3. Record the installation of the new AC Line Snubber Board and
Resistors board and date of installation on the Field Installed Option
label on the side of the drive (as shown below).
Related Documentation
Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature
.
For . . .
Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC
drives
User Manual - PowerFlex Digital DC Drives 20P-UM001…