Rockwell Automation SK-L1-CAP2-D1250 Filter Capacitor Kit SK-L1-CAP2-D1250 for PowerFlex 700L Fr. 3B 480V AC Drives - Manual (Page 11)

Rockwell Automation Publication 20L-IN016A-EN-P - February 2012 11
Filter Capacitor Replacement Kit SK-L1-CAP2-D1250 for PowerFlex 700L Frame 3B 480V AC Drives
Figure 7 - Replacement Filter Capacitor Assembly (shown installed on drive)
Step 8: Power Up the Drive
and Filter Capacitor
Assembly
Replacement
Normal power-up and recommissioning procedures should be followed to ensure
electrical integrity prior to applying power and verifying drive operation.
a. Verify that all tools, hardware, and cardboard or covers have been
removed from the drive enclosure.
b. Re-install the left side panel to the enclosure.
c. Complete normal pre-power-up checks.
d. With the drive enclosure door closed, remove the lock and tag, and
apply power to the drive enclosure.
e. Turn on the drive enclosure circuit breaker.
f. Verify normal drive operation.
New Filter
Capacitor Assembly
Mounting Hardware (3x)
Mounting Hardware (3x)
M6 hex nuts
Surge Trap Location