Rockwell Automation 440C-CR30-22BBB Guardmaster Software Configurable Safety Relay Quick Start Guide User Manual
Page 17
Advertising
Rockwell Automation Publication 440C-QS001A-EN-P — January 2014
15
Quick Start Guide
23. Click No to maintain project in Program mode.
24. Verify the Project.
•
If this step is not completed, the CR30 will stop functioning after 24 hours.
The user can cycle the power to the CR30 and it will function again for
another 24 hours.
•
If this step is completed, the CR30 will continue to function after 24 hours
and will run indefinitely.
•
Verification can only take place while the CCW is connected to the CR30, and
the CR30 is in program mode.
Advertising