Rockwell Automation 440C-CR30-22BBB Guardmaster Software Configurable Safety Relay Quick Start Guide User Manual
Page 18
16
Rockwell Automation Publication 440C-QS001A-EN-P — January 2014
Quick Start Guide
25. The CCW generates the Safety Verification ID. Press OK to continue.
26. Confirm that the Verification ID is present in the CCW Project tab workspace
and the CR30 is returned to the Run mode.
Note that the Verification ID is not saved with the CCW project file. It is saved in
the CR30, so that when power is cycled, the user can upload the project from the
CR30 and view the verification ID and the CR30 functions beyond the 24 hour
limit.
Configuring the PanelView 600
In this application guide, the PanelView C600 is configured over the internet
connection. Open Internet Explorer and type in the IP address to the PanelView
600. In this application, the PanelView 600 has a fixed IP address of 192.168.2.14.