Rockwell Automation 20G PowerFlex 750-Series Power Option Cabinets - Manual (Page 12)

12 Rockwell Automation Publication 750-IN030B-EN-P - October 2014
PowerFlex 750-Series Power Option Cabinets
Release Power Option Cabinet from Shipping Skid
Remove the power option cabinet from the shipping skid before installing bus-
bar kits and other equipment.
1. Remove the M8 hex bolts fastening a vertically oriented power option
cabinet to the shipping skid.
2. Attach lifting hardware observing the rigging geometry illustrated below.
IMPORTANT The shipping skid is designed to support an empty cabinet only.
It is not rated to support a loaded cabinet.
A
>A
>60°