Rockwell Automation 20G PowerFlex 750-Series Power Option Cabinets - Manual (Page 22)

22 Rockwell Automation Publication 750-IN030B-EN-P - October 2014
PowerFlex 750-Series Power Option Cabinets
Drive Side Bus-bar Support
Installation Drive side bus-bar kits are used with right side power option cabinets only.
DC Input Drive Side Bus-bar Supports
Table 19 - 20-750-PBAY-INS-2 Kit Contents
1. Fasten the DC bus-bar support angle to the middle three holes of the
cabinet mounting angle.
2. Tighten the M8 x 22 mm hexalobular screws to 11.3 N•m (100 lb•in).
Description Part No. Quantity
DC Bus-bar Support PN-181183 1
M8 x 22 Hexalobular Screw 419062-5HKL 3
M8 Lock Washer 419064-100SK 3
M8 Flat Washer 419064-1SK 3
M8 Hexalobular Screw
M8 Flat Washer
M8 Lock Washer