Rockwell Automation 20G PowerFlex 750-Series Power Option Cabinets - Manual (Page 15)

Rockwell Automation Publication 750-IN030B-EN-P - October 2014 15
PowerFlex 750-Series Power Option Cabinets
Adhesive Overlay Label
Apply the adhesive overlay label for a uniform appearance of the cabinet lineup.
1. Trim the label to fit the cabinet.
2. Remove the protective backing from the adhesive overlay label.
3. Align the bottom corners of the adhesive overlay label with the alignment
indentations on the cabinet door.
4. Press the adhesive overlay label in place.
IMPORTANT Complete any planned modifications to the door before you apply the label.
Enclosure Width Label Width
600 mm 578 mm
800 mm 778 mm
1200 mm 2 x 578 mm