Rockwell Automation 592- E300 Overload Relay User Manual - Manual (Page 312)

312 Rockwell Automation Publication 193-UM015B-EN-P - June 2014
Chapter 9 Firmware Updates
Upgrading Firmware Firmware for the E300 Electronic Overload Relay modules and their associated
subsystems can be downloaded from the Product Compatibility and Download
Center located at
http://www.rockwellautomation.com/rockwellautomation/
support/pcdc.page? .
After the firmware has been downloaded and installed, run the ControlFLASH
application by selecting ControlFLASH from the Start menu located at
Start ->
FLASH Programming Tools -> ControlFlash as shown below.
Select the Local directory to locate the ControlFLASH upgrade file and press
Next to continue.