Rockwell Automation 592- E300 Overload Relay User Manual - Manual (Page 316)

316 Rockwell Automation Publication 193-UM015B-EN-P - June 2014
Chapter 9 Firmware Updates
The ControlFLASH utility will begin to download the new firmware files. At
the end of the download, the device will automatically reset.
When the device finishes its power cycle sequence, a successful firmware upgrade
message will be displayed. Press
OK to finish the firmware upgrade process.
IMPORTANT Do not interrupt power or communications to the device during the firmware
upgrade process. Failure of control power or communications could
permanently damage the device.